Share |

392 CI - 475HP "GT-40"Z"" Aluminum Head M-6007-C392FT - Ford Racing Crate Motor

Whoa...a 475 HP small block Ford power. 495 ft. lbs. of torque is it. The C392FT is loaded with high performance internals including the Sportsman block, forged steel crankshaft, forged pistons and connecting rods and a hydraulic roller camshaft. Ford Racing aluminum "Z" cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves and roller rocker arms round out the list of performance goodies.

Engine Specifications:

  • 392 cubic inch
  • 475 hp @ 5600 rpm (with headers, and a 750 CFM Holley carburetor not included)
  • 495 lb.-ft. @ 4400 rpm
  • 10:1 compression ratio (nominal)
  • Forged pistons
  • Forged steel cap screw connecting rods
  • hydraulic roller camshaft, .580" lift intake and .602" lift exhaust, duration at .050" is 232 degrees intake and 240 degrees exhaust
  • Double roller timing chain set M-6268-A302
  • Forged steel crankshaft
  • High-performance T-sump oil pan
  • Front sump fits most passenger cars that came factory equipped with front sump pan
  • Rear sump pan fits most Fox body cars
  • MSD billet distributor
  • Ford Racing aluminum "Z" cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves
  • Roller rocker arms M-6564-F351
  • Single plane "Victor Jr." intake manifold M-9424-V351
  • New heavy-duty 5.8L Sportsman block, oil and water pumps., performance oil pan, steel billet flywheel and high-performance harmonic balancer
  • Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
  • Depending on your application, a different timing cover, water pumps , performance oil pan and pickup may be required. See installation notes

Installation Notes: Some or all of the following items may need to be changed from your original engine

  • This engine has a T-sump performance oil pan and pickup, regular rotation timing cover and both regular (installed) and reverse rotation water pumps., and non-EFI valve covers.
  • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information.
  • The timing chain cover will work with most regular rotation water pumps..
  • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
  • A standard rotation water pumps is installed on the engine and a reverse rotation is included loose in the box. Other applications may require different water pumps. and timing chain covers
  • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available
  • The damper assembly M-6316-C351 may require a spacer for pulley alignment
  • The flywheel included (M-6375-A302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel
  • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order).
  • Built with current available parts. Photo and specs may vary.
  • Shipping weight approximately 545 lbs.

small block Ford Crate Engine M-6007-C392FT